JK Fenner

Approx. Rs 99 / PieceGet Latest Price

Fenaflex Tyre Couplings are highly elastic, lubrication free couplings that tolerate large amounts of misalignment in all planes as well as offering simple installation and inspection without disrupting the drive. The Fenaflex coupling also has excellent shock absorbing properties while reducing vibration and torsional oscillations.

• Simple time saving installation – motor and machine remains undisturbed whilst tyre is changed
• Large misalignment capability, 4° angular, up to 6mm parallel and 8mm axial
• Internal load carrying cords are wound in both directions, so there is no problem on reversing drives
• Tyres are available in standard and FRAS (Fire Resistant Anti Static) construction.
• Simple visual inspection to aid maintenance
• Lubrication free
• Taper Lock® and pilot bore flanges
• Pump spacer and flywheel fixing variants available

Approx. Rs 100 / NumberGet Latest Price

Additional Information:

Approx. Rs 104 / PieceGet Latest Price

Approx. Rs 1,414 / MeterGet Latest Price

Approx. Rs 999 / PieceGet Latest Price

Approx. Rs 98 / PieceGet Latest Price

Approx. Rs 99 / PieceGet Latest Price

Pin Bush Coupling

• Simple and Compact
• High Torque and High Speed
• Flanges in pilot or finished bore
• Lubrication is not required
• Comes in 26 sizes (FBC-1 TO FBC-17)
• Power rating ranges from 0.81 kW to 2069kW at 100 rpm.
• Torque Range: 77 – 1,97,600 Nm
• Torque:5 – 3150 Nm
• Bore range:7 – 350mm

Additional Information:

Approx. Rs 2,100 / PieceGet Latest Price

Tough Nut –Parallel Shaft Helical Gear Reducer – FF series

• DESIGN CONCEPTS: the combination of standardization and modularization allows interchangeability with international leading brands, while keeping structure rigidity and compactness.
• ENERGY EFFICIENCY: leveraging the advantage of high accuracy of helical gears, the reducers perform at 90% efficiency with higher stability and lower noise level.
• RATIOS COVERAGE: 2~3 stages of reduction provides a wide range of ratio accommodation from 1/4~1/254.
• LOADING CAPACITY: available with power ranges from 1/4hp up to 60hp depending on different requirements and applications.
• TENSILE STRENGTH: pinion and gears are made with 20CrMo alloy steel plus carburizing heat treatment to enhance performance.
• SPACE EFFICIENCY: compact configuration for minimizing mounting space.
• INSTALLATION FLEXIBILITY: all models are designed for a choice of mounting position (M1~M6) specified by customers.
• APPEARANCE AESTHETICS: the products are designed with modern exterior while maintaining high rigidity.

Approx. Rs 1,999 / MeterGet Latest Price

Tube: Specially rubber – modified SBR-Black.

Reinforcement: One or two braid of high tenacity yarn.

Cover: Weather & abrasion resistance NBR- Black.

Working Temperature: From -30 C to +70 C continuous operation.

MAIN APPLICATIONS: These hoses are intended to be used on all types of pneumatic tools for compressed air in different Industries. Meet exceeds performance requirement of IS:446 – Type 2

Size Range: ¼ and 1½ inches

Approx. Rs 251 / KgGet Latest Price

MS Nut Bolt refers to a type of fastener made from Mild Steel (MS), a widely used material for construction, machinery, and structural applications. A nut is typically a hexagonal-shaped component with an internal thread, and a bolt is a long cylindrical fastener with an external thread. The nut and bolt are designed to fit together, with the bolt inserted through a hole and the nut tightened to secure the two parts.

Approx. Rs 99 / PieceGet Latest Price

HRC Coupling

Semi-elastic, General Purpose Coupling

Permitting quick and easy installation by means of Taper-Lock® bushes, and offering quick alignment, the semi-elastic general purpose HRC coupling is ideal for use with electric motors.

Approx. Rs 2,150 / PieceGet Latest Price

Fenner Vibrator Motors are heavy-duty electric motors designed specifically for use in vibrating equipment, such as vibrating screens, feeders, and conveyors. Fenner, a brand known for its engineering expertise, manufactures vibrator motors that are used in various industries like mining, construction, food processing, and material handling.

These motors are ideal for applications where precise vibration control, reliability, and durability are critical for material separation, screening, and handling.

Approx. Rs 2,200 / PieceGet Latest Price

Tough Nut – Bevel Helical Gear Reducer – FK series

DESIGN CONCEPTS: the combination of standardization and modularization allows interchangeability with international leading brands, while keeping structure rigidity and compactness.

ENERGY EFFICIENCY: leveraging the advantage of high accuracy of helical gears, the reducers perform at 90% efficiency with higher stability and lower noise level.

RATIOS COVERAGE: 3 stages of reduction provide a wide range of ratio accommodation from 1/8~1/215 more than worm gear reducers.

LOADING CAPACITY: available with power ranges from 1/4hp up to 60hp depending on different requirements and applications.

TENSILE STRENGTH: bevel gears and helical gears are made with 20CrMo alloy steel plus carburizing heat treatment to enhance performance.

SPACE EFFICIENCY: 90° transmission and compact configuration for minimizing mounting space.

INSTALLATION FLEXIBILITY: all models are designed for a choice of mounting position (M1~M6) specified by customers.

APPEARANCE AESTHETICS: the products are designed with modern exterior while maintaining high rigidity.

Additional Information:

Approx. Rs 9,999 / PieceGet Latest Price

Gear Coupling

• High Mechanical Flexibility – Crowned Tooth profile
• High Mechanical Flexibility – Curved Tooth profile
• High compensation of Angular, Parallel, and Axial misalignment
• High power carrying capacity
• Suits variety of applications
• Conforming to IS & IPSS Standards
• Seal carrier for easy maintenance
• Carbon Steel forged / cast hubs with hardened teeth
• Comes in 19 sizes (FGC-1 – FGC-19)
• Comes with Torsion shaft.
• Torque: 1100 – 14,70,000 Nm
• Bore range: 14 – 710 mm

Additional Information:

Approx. Rs 99 / PieceGet Latest Price

ESSEX Jaw Coupling

• General purpose, low cost, and flexible jaw coupling
• Flexible Rubber inserts caters to incidental Angular, Parallel, and Axial misalignments
• Comes in Standard (8 sizes), External Spider (6 sizes), and Cushion type (5 sizes)
• All versions are available in spacer type, with spacer size depending on the distance between the shaft ends (DBSE)
• Torque: 20 – 2139 Nm
• Bore Range: 15 – 90mm (via Bore)

Approx. Rs 99 / PieceGet Latest Price

Approx. Rs 1,990 / PieceGet Latest Price

Tough Nut –In-line Helical Geared Motor  – FH Series

• DESIGN CONCEPTS: the combination of standardization and modularization allows interchangeability with international leading brands, while keeping structure rigidity and compactness.
• ENERGY EFFICIENCY: leveraging the advantage of high accuracy of helical gears, the reducers perform at 90% efficiency with higher stability and lower noise level.
• RATIOS COVERAGE: 1~3 stages of reduction provides a wide range of ratio accommodation from 1/1.3~1/27788.
• LOADING CAPACITY: available with power ranges from 1/4hp up to 150hp depending on different requirements and applications.
• TENSILE STRENGTH: pinion and gears are made with 20CrMo alloy steel plus carburizing heat treatment to enhance performance; the input pinion is equipped with double bearing support to provide stability at high speed.
• COMPLETE SERIES: vertical and horizontal mounting along various input mechanism ensure the products meet a wide range of applications.
• INSTALLATION FLEXIBILITY: all models are designed for a choice of mounting position (M1~M6) specified by customers.
• APPEARANCE AESTHETICS: the products are designed with modern exterior while maintaining high rigidity..

Additional Information:

Approx. Rs 2,300 / PieceGet Latest Price

Worm Reduction Gear Box – FA/FU/FV Series

• The casing is made of closely-grained FG-260 Grade C.I
• The Gearbox is provided with well-designed fins and fans for adequate dissipation of heat
• The design is based on BS 721:1963 Class A standards
• The Gearbox Design is modular and makes it interchangeable with other standard gearboxes
• The Worm shaft is built with high-quality case-hardened steel that is precision-manufactured and ground-finished for better performance
• Both Worm & Worm Wheel Shafts are mounted on High-quality Taper Roller / Angular contact Bearings to handle axial thrust and overhung loads
• All Worm Gearboxes are available in Ratios of 5:1 to 70:1
• Type- Horizontal/Vertical/Adaptable Gearbox